Brankis wrote:check to see if the 1/4" tip has one or two black rings. if only a single ring then it's unbalanced.Lluck wrote:Leandro Barros wrote:Maybe i can help, have a identical setup. If you want use multiple outs, first make sure that have activated all 828 inputs/outputs in Live preferences.
Connect balanced TRS cable from MOTU outputs to each inputs in the ZED.
Select each corresponding MOTU outs in Live tracks.
Use mixer record out to send it back to soundcard,recorder, whatever you use...
Just simple routing hope it help!
Maybe I don't know enough about cables. I am doing this setup with simple 1/4 inch cables. How are balances TRS cables different? Perhaps this is the problem....
i would hook up the zed using your alt out as a separate monitor control and use the main balanced XLR output to record in to the motu. better to run balanced for the final recording to avoid any noise/ground loop hum, especially if you are running longer cables
Thanks for your help.....I am not sure what you mean by using the alt out as a monitor control.....also, what kind of cable should I get for the XLR output? Would it just be a single 1/4 inch on the other end to plug into the input on the MOTU?