Hey folks..
Looking to develop a custom MIDI control interface..
I've been looking into Doepfer... I love his work, but if I can do something on my own, granting me both a learning experience AND saving several hundreds or even thousands of dollars, I'd love to.
I haven't done electronics work since high school electronics class, so you can assume I'm a complete idiot and would need a guide or instructions FOR the complete idiot. Estimated costs, where to get stuff, basically everything... where can I find it? Where should I start?
I'd also consider contracting someone if the rates were reasonable but I'm real curious about making my own though.
Here's what I'm looking to do:
Essentials:
-16 groups of 4 or 5 knobs
-a corresponding slider for each group of 4 or 5 knobs (16 total)
Optional/extra:
-16 buttons with toggle on/off led
-assorted push buttons for triggering various events via midi.
DIY MIDI Controller help
-
robert lowell
- mnml mmbr
- Posts: 258
- Joined: Thu Jan 27, 2005 4:04 am
- Location: brisbane, australia
- Contact:
i *did* mention above that I looked in to doepfer didn't I?robert lowell wrote:http://www.doepfer.de/home_e.htm
-
robert lowell
- mnml mmbr
- Posts: 258
- Joined: Thu Jan 27, 2005 4:04 am
- Location: brisbane, australia
- Contact:
i figured if i searched it up after reading your post, others would try as well. to save someone else the hassle, i posted.adam wrote:i *did* mention above that I looked in to doepfer didn't I?robert lowell wrote:http://www.doepfer.de/home_e.htm
http://www.synthzone.com/miditech.htm try this if you haven't.
What do they have for DIY types?d-vox wrote:http://www.m-audio.com/