Getting more groove from my Tr-707 using Ableton.
-
- mnml maxi
- Posts: 542
- Joined: Wed Jul 02, 2008 1:51 am
- Contact:
Re: Getting more groove from my Tr-707 using Ableton.
i run my 707 through 2 kaoss pads. i play the drum parts live using the instrument buttons, mangle with KP2 and then loop on the KP3. i almost never use a sequencer, drums parts with lots of "feeling" are played by hand.
-
- mnml mmbr
- Posts: 225
- Joined: Wed Mar 25, 2009 2:50 am
- Contact:
Re: Getting more groove from my Tr-707 using Ableton.
If you are using different audio input channels for some sounds, would it be possible to play with the Track Delay on for example the snare/clap to move it a bit back or forth from the rest of the sounds? That's a technique I use with the internal drum instruments. Use in conjunction with the other suggestions, such as a delay on the hihats. Cheers.
-
- mnml mmbr
- Posts: 237
- Joined: Fri Jun 19, 2009 6:34 pm
- Location: NY, USA From DFW, USA
- Contact:
Re: Getting more groove from my Tr-707 using Ableton.
I recommend the Linn 9000 if you can find one. The samples have more punch and the sequencer is swinging, it has a nice feel. An Akai MPC-60 is good too.eggnchips wrote:Hey chaps,
The 707 is quite a static machine with not much groove so I am thinking of ways of getting it grooving a little more by somehow effecting the input signal within an Ableton channel.
Say I have the hi hats going into a channel. By using Ableton effects or possibly Max, can you think of anyway of making the input audio a little more random therefore grooving somewhat more?
I have Max but haven't looked into it yet although maybe an LFO effecting a GATE could be a solution?
The 707 is great for old Chicago house or DJ Rush type stuff.
hey everybody : I'm a douche !Dal-Tech wrote: Everyone else is trying to be cool, not me.
-
- mnml maxi
- Posts: 859
- Joined: Mon May 04, 2009 5:27 pm
Re: Getting more groove from my Tr-707 using Ableton.
this kind of machine you mean could be realized with ACMEsteevio wrote: the reason i asked above about what clock inputs the 707 has, is because if it has any sort of analogue clock input you could swing the clock before it gets to the 707. i just dont know the machine
Re: Getting more groove from my Tr-707 using Ableton.
what i meant was i dont know the TR707. i dont know what inputs it has.dirddey_iddler wrote:this kind of machine you mean could be realized with ACMEsteevio wrote: the reason i asked above about what clock inputs the 707 has, is because if it has any sort of analogue clock input you could swing the clock before it gets to the 707. i just dont know the machine
-
- mnml maxi
- Posts: 859
- Joined: Mon May 04, 2009 5:27 pm
Re: Getting more groove from my Tr-707 using Ableton.
oh okay,
maybe i got you wrong. sorry
With ACME you are able to create an analog or digital (midi) timing signal which can be shifted before or behind the even clock timing of your master system. You can create or use preset shuffle patterns and apply them to machines that dont have good swing capabilities (e.g. shifting the clock triggers like the shifting of patterns in a 909). ACME starts on 1/4 Bar or 1 Bar (have to check it) later to get the possibilites for time shifting (lacking of a time machine )
TR 707 has Midi Sync, Trigger Sync and Din Sync capabilities
maybe i got you wrong. sorry
With ACME you are able to create an analog or digital (midi) timing signal which can be shifted before or behind the even clock timing of your master system. You can create or use preset shuffle patterns and apply them to machines that dont have good swing capabilities (e.g. shifting the clock triggers like the shifting of patterns in a 909). ACME starts on 1/4 Bar or 1 Bar (have to check it) later to get the possibilites for time shifting (lacking of a time machine )
TR 707 has Midi Sync, Trigger Sync and Din Sync capabilities